Micro-Fix

Eddy current inspection meathod with experience.

日本語

English

Application examples of Heat treatment Quality inspector

Micro-Fix > Application examples > Application examples of Heat treatment Quality inspector

Application examples of Heat treatment Quality inspector

CASE01

Heat treatment quality inspection for constant velocity joint

Background
One of the drawback of sampling destructive inspection often applied for heat treatment inspection is not be able to guarantee the quality of entire products. Also has a risk of product wastage, once any defect is found.
Our proposal and outcomes

Achieved full inspection by installing eddy current system at the end of the manufacturing process, and so sampling destructive inspection was abolished. The sensor moves axially step by step, so that multiple section can be inspected.

CASE02

Material mix-up inspection for transmission gear

Background
The raw material of running product was changed, and so 100% inspection was essential in order to avoid any mix-ups.
Our proposal and outcomes

As our inspection devices commonly has I/O connection, Just simply installed into the running production system. Defect outflow was 100% prevented.

CASE03

Heat treatment inspection for bearings

Background
Required 100% inspection for induction hardening and also cycle time was limited as great amount of daily production.
Our proposal and outcomes

We suggested using slider and through- type sensor in order to save inspection cycle time. As the inspected object does not need to stay in the sensor, achieved inspection time 3 pieces par second.